Engineered Wood Flooring

What is Engineered Wooden Flooring

This is a type of floor manufactured by pressing together several layers of wood. The pieces joined with glue. It incorporates interior layers that are hard or soft woods and the external layer consist of hard woods of different types.

 

The manufacturing process involves the rotary sawing method or the slicing method.  The rotary method involves peeling all round the trunk to produce a continuous sheet of wood. The slicing method means cutting a slide across the trunk leading to a bigger piece of wood. The thickness is the factor that determines the quality of the floor. Therefore, the thicker it is the higher thee quality. In most cases, it ranges from 3.7 inches to 6 inches.

Durability of engineered wooden flooring

When asking what is engineered wooden flooring, durability is one of the factors to consider. This floor can last for at least thirty years without the need to replace it. This makes it a favorite for institutions and family homes that will be passed down generations. If the outer layer is thicker, it will last longer than that. However, the quality of the floor depends with the maintenance. For some of the rooms have a lot of activity going on, it is wise to install this floor in the other rooms.

Engineered Wooden Flooring

Cost of engineered wooden flooring

This floor comes with its own costs of installation and maintenance. The highest amount is in the preparations and in removing the old floor. If the homeowner can carry out the small tasks, the costs go down drastically. Other costs come in the lamination and in finishing the floor.  This is the case if the homeowner goes for the unfinished type that allows the person to choose the type of finish needed. The prices also vary depending with the type of wood chosen such as the Walnut, oak or the cherry.

Benefits of engineered wooden flooring

What is engineered wooden flooring adding to the surface that other floors do not offer? It reduces the expenses of constant repairs like on the concrete floors. It does not chip off and neither does it have gloat that may come off. This continuous plank flows from one end of the room to the other. In addition, the person can opt for the unfinished type does not involve the costs of finishing or staining. It is in the natural state of the wood and the homeowner can finish it off when there is enough money. These floors are also convenient for rooms with high moisture content. Therefore, they are suitable for the kitchen and the washroom. This type of floor does not leave gaps within the surface or the risk of nails popping up on the surface.

Maintenance required for engineered wooden flooring

It is appropriate to sand the floor to even out areas that have bowed to the feet pressure. The best choice is the fine sanding paper so that it dose not leave large marks on the floor. Finishing it with oil-based finishes makes the floor liven up with a glow. It also prevents moisture and other substances from seeping into the wood.